FS-V31CP Keyence Fiber Optic Sensor
Specifications:
Type: 1-output + 1-input with M8 connector
Model: PNP, FS-V31CP
Control output:1 output
External input: 1 input
Connector: M8
Light source: Red, 4 element LED (Wavelength:640 nm )
Response time:33µs(HIGH SPEED)/250µs(FINE)/1 ms(SUPER TURBO)/4ms(ULTRA TURBO)/16 ms (MEGA TUROB)
Output selection: LIGHT-ON/DARK-ON(switch-selectable)
Display indicator: Operation indicator:Red LED/Dual digital monitor: Dual 7-segment display,
Preset Value (4 digit green LED indicator ) and Current Value range:0 to 64512; Excess gain :OP to 999P
Hold function: Possible to display both peak and bottom hold values, selectable from 5 variations
Bar LED monitor: Excess gain displayed (85﹪to 115﹪ in 7 steps).Scaling display.
Detection mode: Light intensity (area detection possible, automatic sensitivity-tracking function provided)
【Limited light intensity /Count check/Abnormality detection】
Time function: OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + ON-delay + One-shot timer, selectable
Control output: open-collector 30 V, 100 mA max.(main unit only)/20 mA max.(when the expansion unit(s) is connected).
Residual voltage: 1 V max.
Monitor output: Voltage output:1 to 5V ,Load resistance:10 kΩ min ,Repeatability: ±0.05﹪ of F.S
Response time: 1 ms (FS-V31M only)
External input: Non-voltage input(contact, solid-state),Input time:2 ms (ON) /20 ms (OFF) min.
Unit expansion: Up to 16 expansion units can be connected (a total of 17 units).
Note that the 2-output type should be counted as two units.
Power supply: 12 to 24 VCD ± 10﹪,ripple: 10﹪max. Class2
Current consumption: Normal operation: 990 mW (at 24V: 42 mA max, at 12 V:83 mA max.)/
Power-saving mode: 820 mW (at 24 V: 34 mA max, at 12 V: 68 mA max.)
Ambient illumination: Incandescent lamp: 20,000 lux max. Sunlight: 30,000 lux max.
Ambient temperature: 14 to 131 oF(-10 to 55 0C ),No condensation
Relative humidity: 35 to 85﹪,No condensation
Vibration: 10 to 55Hz, double amplitude: 1.5 mm , 2hours each in the X,Y and Z axis
Shook: 500 m/s2 in X, Y, and Z directions, 3 times respectively
Housing: Polycarbonate
Size: 30.3mm(H)×9.8 mm (W) ×71.8 mm (H)
Weight: 80g
Tell us what you think about FS-V31CP Keyence Fiber Optic Sensor, share your opinion with other people. Please make sure that your review focus on FS-V31CP Keyence Fiber Optic Sensor. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for FS-V31CP Keyence Fiber Optic Sensor? Please contact Customer Service. (Our customer representative will get back shortly.)